iPhone Repair Tutorials
iPod Repair Tutorials
Phone Repairs
General Household
iPod Touch LCD Installation
Quick Links |
iPod Touch Glass and LCD Installation
Before attempting any repair be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Tools and Parts required:
New LCD/Glass screen
Pry Tools
Phillips Screw driver
Installing the New Touch Screen
- After thoroughly checking from remaining pieces of glass you can install the screen
- Place the home button in position
- Remove the protective film from the new Touch Screen
- Slide the screen cable under the frame and position into place
- Once aligned gently press the Screen into place
Installing the LCD
- Place the LCD into place with the cable on the opposite side of the home button
- Align the screw holes ensuring the screen fits firmly against the frame
It is likely you will can reuse the adhesive that holds the digitizer in place. In the event you have scraped it all away, I recommend using a Double-Sided-Sticky tape to adhere the glass to the phone.
Add this page to your favorite Social Bookmarking websites